Removes up to 15 layers
of paint and industrial coatings in one
application
Coverage for 1 Qt Size
is 12.5 sq. ft.
User friendly, does not
contain methylene chloride, caustic or toxic
chemicals, will not burn hands
Water based formula
100 % biodegradable
Odor free
Does not require neutralization
For interior and exterior
use
Product Description:
A revolutionary paint remover that is safe for the
user, the substrate and the
environment. This 100% biodegradable, water-based
stripper is extremely effective
for removing multiple layers of architectural and
industrial coatings from virtually
all interior/exterior surfaces - wood, brick,
metal, concrete, stone, plaster,
fiberglass, etc. Smart Strip does not contain
methylene chloride, caustic, or
toxic chemicals. It is odor free. Smart Strip is
exceptional for the safe removal
of lead based paint and is excellent for
intricate, carved or molded surfaces.
It is also great for removing marine paints
without damaging the gel coat. Because
it is a paste, Smart Strip can easily be applied
by brush, roller or conventional
airless sprayer. It is formulated to remain wet
and effective over extended periods
of time and does not require the use of Peel Away®
Paper. Although the use of
Peel Away® Paper will accelerate the removal
process and extend dwell time. Peel
Away® Paper can be purchased separately.
USE ON:
Works on almost all surfaces,
wood, brick, concrete, plaster, steel, iron,
fiberglass, etc. Easily adheres
to vertical or overhang surface. Can be used on
interior and exterior surfaces.
EASY TO APPLY:
Limitations: For best results, surface
temperatures should be 60ºF – 95ºF. Product
can be applied as low as 37ºF, however,
efficiency/effectiveness are reduced
and dwell time increases.
Test Patch: Always prepare
a test area on each type of surface and paint
coating prior to full application.
Testing before beginning the project is the best
way to ensure product suitability.
This will also determine the proper thickness of
the remover and the dwell time
required for project completion.
Preparation: Mask/protect
areas where stripping is not desired, including
adjoining surfaces where overspray
may travel. Polyethylene (plastic sheets) and
masking tape create an effective
barrier. Plants and other foliage should be
covered or rinsed thoroughly before
and during application.
NOTE: SMART STRIP™ will
not affect glass, aluminum, or plastic surfaces.
Application & Spread Rate:
Using brush, roller or airless spray, apply
approximately 1/6” to 1/8” thick
(refer to test patch results) according to the
age, number of layers, and type
of coating being removed. SMART STRIP™ provides
an average spread rate of 45
- 50 sq. ft. per gallon; results may vary.
Removal: Remove softened/lifted
paint using a scraper, taping knife, squeegee or
power washer. Agitate tough
to remove residue with a stiff nylon brush or
scouring pad, paying particular
attention to crevices, grooves and cracks.
Exterior stripped surfaces should
be rinsed thoroughly with a power washer.
Interior surfaces can be rinsed using
a spray bottle or pail, a sponge and water, or
denatured alcohol to remove remaining
residue.
Clean Up: Collect remover,
paste and paint residue in plastic bags and
dispose of in compliance with local
government regulations. Do not collect or store
removed paint/paste waste in
metal containers. Clean up airless sprayer by
running water or denatured alcohol
through the equipment soon after application has
been completed. Allow surface
to dry thoroughly before repainting.
Accelerate the Paint Removal Process with
our EXCLUSIVE technologically advanced
fibrousPaint Removal Paper with NO
additional postage or shipping charges. Click Here For Details
QUESTIONS OR ORDERS
CALL TOLL FREE1 800-315-02048am - 5pm CST
Phone orders please mention "Smart" Call us anytime at (800) 315-0204, Mon-Fri 8-5pm CST
*No Sales Tax Except for the State of Wisconsin
Order Online or call us 800-315-0204 International orders please call 1-920-968-0539
