Safe N Easy Oil / Grease Remover - 5 Gallons

Product Features

•Cleans motor oil, grease and heavy soils from concrete and asphalt surfaces
•Non-Toxic, Non-Abrasive & Non-Flammable
•Cleans without scrubbing
•500/625 Sq. Ft per 5 gallons
•Apply, wait and rinse.
•Nothing is easier!!

Before and After

Oil Stain on cement floor before applying Safe N Easy Oil & Grease Remover.

Safe & Easy was applied to the oil stain on the cement floor.

Cement floor after using Safe & Easy Oil & Grease Remover.

Safe n' Easy Oil/Grease Cleaner is a highly concentrated, biodegradable cleaning product and has specifically been formulated to clean motor oil, grease and heavy soils from concrete and asphalt surfaces. This product can also be used to clean walkways, barbecue grills, lawn and playground equipment and a variety of other surfaces. Safe n' Easy Oil/Grease Remover has been engineered to actually penetrate beneath the surface into porous concrete, asphalt and masonry surfaces. It does not sit on top of surfaces like other cleaners. Usual dwell time is three hours and it can then be either pressure washed or hosed off. No scrubbing is required.

General Application:

Apply product liberally by spraying or brushing it onto the surface being cleaned. DO NOT DILUTE. If it is being applied to porous concrete/asphalt surfaces, allow the product to remain on the surface for approximately three (3) hours. This gives it time to penetrate which will then allow the oil/grease to literally be driven up and out of the surface when either power washed or hosed off with water. If the product is being used to clean sealed surfaces then the dwell time could only be 15-30 minutes and this would be determined by doing test areas. NO scrubbing of the treated surface is necessary.