10 gallons w neutralizer Retail Value 367.52 Our Price 239.95

Special Packaging Required $15 - FEE WAVED WHEN PURCHASING THIS PACKAGE.

PRODUCT FEATURES:

• Removes 30+ coats of lead based or oil paint with one application. Can be used to remove latex from wood or metal surfaces if there is an oil based paint or primer as the initial coat.
• 5 gallon size. Enough coverage for up to 80 sq.ft.
• Includes appropriate amount of Peel Away® Paper for the approximate coverage of 80 sq.ft. (Paper located under the lid.)
• Easily adheres to a vertical or overhang surface.
• Can be used on interior and exterior surfaces.
• Contains no Methylene Chloride, MEK, Toluene - VOC is Zero. THERE ARE NO FUMES AND NO FLAMMABLE SOLVENTS.
• The safest and easiest method of removing lead based paint - there is no airborne lead dust.
• It is the most affordable solution to safe, easy-to-use paint stripping.
• Safe removal of marine coatings with NO damage to the fiberglass.
• Particularly suited for removing paint from carved and intricate detailed surfaces, interior moldings, and window frames. It is also especially suitable for plain or ornate plaster walls or ceilings, brick, concrete, stucco, softwoods, i.e. pine, cast iron, steelwork, marble or fiberglass.

USE ON:

Works on almost all surfaces, wood, brick, concrete, plaster, steel, iron, fiberglass, etc. Easily adheres to vertical or overhang surface. Can be used on interior and exterior surfaces.

EASY TO APPLY:

The system includes a paste that is spread over the surface to be stripped. This paste is then covered with a fibrous laminated cloth, which controls evaporation, and is left on until all of the paint is dissolved. The paste stays wet for 24 to 48 hours. The laminated paper is then removed with the bulk of the paste and paint adhering to it and the stripped surface is washed clean and neutralized. The fibrous laminated paper also protects the passerby while the stripping process is taking place. Coverage is up to 80 sq.ft. per 5 gallon package, depending upon application.

CLEAN UP:

• Exterior Clean Up: For exterior work, hosing off the residue with water can help speed up the cleaning process and anything from a simple hose to a pressure jet or steam can be used. However, pressure should be kept low on woodwork and sensible precautions should be taken to protect plant life, etc. from splash back, especially those sensitive to alkalinity. Mist surface lightly with water spray. Then with a nylon bristle scrub brush agitate surface to loosen all residue. Thoroughly scrub surface being sure to get at all crevices, grooves, cracks, etc. PEEL AWAY® 1 is caustic, and requires neutralization before repainting. Rinse with PEEL AWAY® NEUTRALIZER before applying new coating.
  
  
• Interior Clean Up: Interior cleaning can be accomplished with a spray bottle of water or pail with a sponge. Make sure surface is entirely clean of any paint/paste residue. Let dry for 24 hours before proceeding with neutralizing process for both interior and exterior surfaces. PEEL AWAY® 1 is caustic, and requires neutralization before repainting. Rinse with PEEL AWAY® NEUTRALIZER before applying new coating.

NOT RECOMMENDED FOR USE ON:

• Plasterboard; plywood; veneer; aluminum
• Hardwoods, if not repainting, Use PEEL AWAY® 6 or PEEL AWAY® 7
• Brick or masonry, if latex paint is prime coat. Use PEEL AWAY® 7